Performance
You can mainly use it for the part where heat resistance is required.
- How about the effect of finishing thin film rather than standard film thickness?
- How about the effect of finishing thick film?
- Is the boiling water resistant paint safe with alkali hot water?
- Is there the one in okitsumo paints that gained the JIS standard?
- Are paints of silicon type shed?
- Tell me your equal paint of other companies.
- Is color adjustment possible?
- I did primer coating and waited for drying, then I did the top coating but couldn't paint well by blotting.
- The paint is transparent so the color couldn't be attached clearly.
- Mat silver paint dries and is rough on the surface.
- The film peeled off. How do I cope with it?
| 1. How about the effect of finishing thin film rather than standard film thickness? |
|---|
Film performance can be maintained by finishing the standard film thickness. Thin film may deteriorate the appearance of gloss or transparency and will not be able to perform well for anti-corrosion and anti-chemicals. |
| 2. How about the effect of finishing thick film? |
|---|
| It may be the cause of peeling off the film with the amount of solvent in the paint film volatilize when it is in a baking process(especially at rapid heating). |
| 3. Is the boiling water resistant paint safe with alkali hot water? |
|---|
It is safe when the ph=7-11. It is not suitable for stronger alkali than ph=11 and acid. |
4. Is there the one in okitsumo paints that gained the JIS standard? |
|---|
There is no JIS standard for “heat resistant paint”. However, we examine the paint film performance according to JIS standard and ascertain the performance of the paint film. |
5. Are paints of silicon type shed? |
|---|
General heat resistant paint does not shed. |
6. Tell me your equal paint of other companies. |
|---|
| Please consult to the inquiry page for more details. Then, if you could inform us your application, material, and Heatproof temperature, we can select the best suitable paint in our products. |
7. Is color adjustment possible? |
|---|
It is possible for the paints that Heatproof temperature is 200°C and 300°C. |
8. I did primer coating and waited for drying, then I did the top coating but couldn't paint well by blotting. |
|---|
The primer coat may not have been completely dry when you applied the top coating. There is a possibility that the primer coat was not dry enough, so make sure that the primer coat is completely dry before you apply the top coating. The interval time differs depending on the combination of paints, so please refer to our inquiry page for more information. Also, the detailed information is written on the painting specifications of the paint that is being used. To obtain the painting specifications, please contact us via the inquiry page. |
9. The paint is transparent so the color couldn't be attached clearly. |
|---|
It seems not enough stirring of paint. Please start painting again after stirring paint. We recommend you to paint while stirring paint. |
10. Mat silver paint dries and is rough on the surface. |
|---|
The color pigment of silver is aluminum paste, so it is rough surface finish. Especially mat type may stick its pigment to hands, but there is no problem about the film performance. |
11. The film peeled off. How do I cope with it? |
|---|
Please remove old paint film and rust completely, then repaint it. |
After we got an inquiry from you to the inquiry page, a person in charge will return you back by a phone call or e-mail.