NTB3101
◆Acrylic resin / Coefficient of static friction：0.15
◆Forced baking type / Heatproof temperature 200°C
◆Available in custom colors ( Standard colors are black, blown, and green.)
◆It is possible to bake in low temperatures(180°C).

NTB3202 (High Hardness)
◆Epoxy resin / Coefficient of static friction：0.10
◆Forced baking type / Heatproof temperature 200°C / Black
◆It is possible to bake in low temperatures(180°C).Epoxy resin
◆It excels in smoothness(low-friction coefficient) and adhesion.

NTB3301 (High Hardness)
◆Poriamidimid resin / Coefficient of static friction：0.08
◆Forced baking type / Heatproof temperature 230°C / Black
◆It excels in smoothness(low-friction coefficient), adhesion, chemical resistance, and oil resistance.

NTB3302
◆Poriamidimid resin / Coefficient of static friction：0.07
◆Forced baking type /Heatproof temperature 230°C / Black
◆It excels in smoothness(low-friction coefficient), adhesion, chemical resistance, and oil resistance.

NTB3303 (Possible to Bake in Low Temperatures)
◆Poriamidimid resin / Coefficient of static friction：0.08
◆Forced baking type / Heatproof temperature 230°C / Black
◆It excels in smoothness(low-friction coefficient), adhesion, chemical resistance, and oil resistance.

NTB3304
◆Poriamidimid , Molybdenum disulfide , etc resin / Coefficient of static friction：0.07
◆Forced baking type / Heatproof temperature 230°C / Black
◆It excels in smoothness(low-friction coefficient), adhesion, chemical resistance, and oil resistance.

NTB3306
◆Poriamidimid resin / Coefficient of static friction：0.08
◆Forced baking type / Heatproof temperature 230°C / Available in custom colors
◆It excels in smoothness(low-friction coefficient), adhesion, chemical resistance, and oil resistance.
◆Standard colors of NTB3306 are black, rust, yellow, white, and blue. Good adhesion to stainless steel.

◆Application :
[Release] Casting metal mold, Hot press, Diamond tool mold, prevention to overbake of a heating bolt
[Lubricity] Prevents the over-screwing of bolts and bearings / Adds smoothness when under high temperature

◆Heatproof temperature 450 °C / Black
◆The film contains higher concentration of graphite so that it achieves excellent releasing and durability properties.
◆Application :
[Release] Casting metal mold, Hot press, Diamond tool mold, Prevents the overbaking of heating bolts
[Lubricity] Prevent the over-screwing of bolts and bearings / Adds smoothness when under high temperature

◆Heatproof temperature 260°C / A:White ・B:Clear
◆PTFE Coating A: It excels in lubricity and non-stickness with little stain on the material surface.
◆Application : Adds smoothness to fasteners and shutters / Prevents noisy sounds
◆PTFE Coating B:Even in relatively high temperatures(150 - 200°C), the active ingredients will not be thermally decomposed.It excels in release ability and durability with little stain on the material surface.
◆Application : Rubber / All kinds of resin molds / Electronic components like a connector

◆Heatproof temperature 350°C / Black
◆It can gain an excellent lubricant film especially in the vacuum by a lamellar crystal of olybdenum disulfide.
◆It is excellent in lubricity and the durability.
◆Application : Adds smoothness to places where oil is disliked / Adds smoothness to places where adding oil is difficult.

◆Lubrication:Heatproof temperature 150°C / Release Ability:Heatproof temperature800°C / White
◆It is made with film formed by talc corpuscle by an inorganic binder, and excels as mold lubricant for molten metal at high temperatures.
◆Application : Casting metal mold of aluminum / Zinc / Tin