● "Okitsumo one touch spray" are customized as aersol spray with techniques cultivated by the general heat resistant paint.
● They excel in corrosion resistance and have a wide range of colors.
● They are easy to handle and suitable to repair and repaint on any kinds of heating equipments and heating apparatus such as heaters, exhaust mufflers and pipes.
● You can adjust the angle of jetting as you like because the nozzle of this product can be turned around 360 degrees and the shape of the jetted fog is like an oval.
● CONTENT:300ml
OneTouch SprayIt is suitable for repainting heaters, ducts, chimneys, and heating apparatus.
One Touch Spray Semi Gloss
One Touch Spray Mat
|
||||||||||||||||||||||||
One Touch Spray for Muffler
It is suitable for recoating exhaust pipes and mufflers of automobiles and motorcycles.
|
||||||||||||||||||||||||
＊The above color numbering system is based on JPMA Standard Paint Colors. (F-Edition, 2011)
1. Surface Treatment |
|---|
Remove dirt, oil, and rust well. |
2. Before Coating |
|---|
| Shake the can well until you hear the sound of a ball in the can.[＊1] |
3. Coating |
|---|
Keep the position of the nozzle 30cm to 40cm from the object and spray it. （Film Thickness:10～20μm) |
4. Drying |
|---|
Air dry or Forced baking |
5. After Using |
|---|
| Turn the can upside down
and spray it out, then wipe out the nozzle hole with a cloth. (When something solid gets stuck in the hole of the nozzle, wash it with thinner.) |
[＊1] The jetting condition worsens when the temperature is low. Please dip the can into warm water for 3 to 5 minutes and start using.
[＊2] Air temperatures affect the drying time.The painted surface is dry to the touch but not completely cured.
(In order to bake completely, baking at 180°C for 20-30 minutes is required.)
Painted surface may become tacky and produce smoke, but in the mean time it will stop and be cured.
[＊Notice] When you abandon it, pull out the inside gas well by pushing the push button.
