● Okitsumo's boiling water resistant paint makes full use of its excellent ability when it is used on the insides of tanks and boilers.
● It excels in adhesion and corrosion resistance when in boiling water. Blistering and peeling, which used to be a fatal defect, does not appear anymore. The paint forms a protective film that lasts for a long time.
● It can endure at least 10,000 hours in boiling water (at 100°C).
● It also endured for 100 hours during the salt water spray experiment.
● It is durable to steam(100 to 120°C) and protects materials from rust and corrosion.
＊Please do not paint on the insides of water bottles, bathtubs or food containers.
Gray Paint Used as Both Primer and Top Coat
For Color Specification
|
＊The above color numbering system is based on JPMA Standard Paint Colors. (F-Edition, 2011)
＊Please ask us the color availabilities because the colors are basically limited to weak colors .
Water is a very stable chemical compound. However, active molecule movements start suddenly after water is heated up to about 100°C, which is its boiling point. Water molecules activated by this heat energy tends to produce a by-product by reacting with and forming other ions which cause corrosion if they touch a metal surface. And if OH- or any materials contained in the coating film start decomposition, they react to each other and end up destroying the film gradually. Moreover, a part of vapor intrudes directly into the film and destroys them. As a result, the film produces blisters or peelings. Okitsumo boiling water resistant paint has a characteristic to endure in those conditions. |
1.Surface Treatment |
2.Paint Agitation | 3.Painting |
4.Drying | 5.Washing Film Surface |
|---|---|---|---|---|
| First class Keren [＊1] |
Dilution/ Stirring (Use the hardener) |
Paint with brush or spray [＊2] |
Air dry for 7 days or more [＊2] [＊3] |
More than 3 times with hot water [＊4] |
1.Surface Treatment |
2.Primer Agitation | 3.Primer Coating |
4.Interval Time to Top Coat | 5.Top Coat Agitation |
|---|---|---|---|---|
| First class Keren [＊1] |
Dilution/ Stirring (Use the hardener) |
Paint with brush or spray [＊2] |
From 16 hours to 12 days | Dilution/ Stirring (Use the hardener) |
| 6.Top Coating | 7.Drying | 8.Washing Film Surface |
|---|---|---|
| Paint with brush or spray [＊2] |
Air dry for 7 days or more [＊2] [＊3] |
More than 3 times with hot water [＊4] |
[＊1] Remove rust, old films, oil, water stains completely and cleans them up until the material surface appears.
[＊2] Keep the room ventilated and be careful not to inhale the steam.
[＊3] Air temperatures affect the drying time.
[＊4] Wash the object at least 3 times because the hardener element is extracted on the surface.
[＊Notice] Painting Conditions:Please abstain from painting under the condition below.
・When rainfall and snow are forecasted.
・When the outside temperature is under 5°C, and the difference with the dew point is within 3°C.
・When the relative humidity is 85% or more.
・When it is windy.
